Visit us in our Springvale Showroom

Davco Ultraflex PRO 20.0 kg

$32.00 AUD

Per Unit

Description

Davco® Ultraflex Pro

A premium grade, flexible, cement based, rubber modified cement based tile adhesive suitable for a variety of substrates.

  • Commercial grade
  • Thick or thin-bed applications
  • Low VOC

Usage

Davco® Ultraflex Pro is suitable for both thin & thick-bed tiling applications.  Davco® Ultraflex Pro is suitable for use internally & externally of both wall and floor substrates. Suitable substrates include;

  • Concrete Minimum 7 days old at 22°C
  • Screeds minimum 24 hours old at 22°C
  • Fibre cement sheeting
  • Compressed cement boards
  • Extruded cement boards
  • Sika / Davco approved waterproof membranes
  • Rendered block or brickwork
  • Under-tile heating systems
  • Timber floors (sheeted with fibre cement sheeting)

  Suitable Tile Types include;

  • Ceramic
  • Porcelain
  • Mosaic
  • Slate & Quarry Tiles 
  • Natural Stone (non moisture sensitive or translucent)
  • Terracotta

Advantages

  • Commercial grade
  • Thick or thin-bed applications
  • Low VOC
  • Flexible S1 Performance
  • Extended open time
  • Non slump
  • For rigid & flexible (framed) substrates

Colour

Off white powder.

Mixing Ratio

6-7 Litres of clean potable water per 20kg bag.

Layer Thickness

Maximum Layer thickness shall be no greater than 10mm.

Ambient Air Temperature

Min +5°C to Max 35°C

Substrate Temperature

Min +5°C to Max 35°C

Pot Life

1.5 Hours

Open Time

30 Minutes

Adjustability Time

20 Minutes

Applied Product Ready for Use

Set time before grouting

6-8 hours

Set time before dry area service

24 hours

Set time before wet area service

2 days

All measurements are taken at 22°C & 50% relative humidity.

** Specifications vary according to site conditions and should be taken as a guide only.

 
Back to top